Kum-In Corporation
5 1

Integrated Oil/Water Separator, Pack-Type (Larger Models)

Contact Now* Send an Inquiry to this supplier.
or
Start Order * Name your price

Contact us

Kum-In Corporation
[Korea]

Address
No.103 Daeryung Technotower-5, 493 Gasan-dong, Geumcheon-gu, Seoul
Phone
82-2-21077685
Contact name
ChulBok Kim

Quick Information

  • Brand Name: OilSeizer
  • Place of Origin: Korea
  • Model Number : KOWSI-0.3, KOWSI-1.2, KOWSI-2.4, KOWSI-4.8

Description

 
 
   
 

OILSEIZER®

Integrated Oil/Water Separator, Pack-Type (formerly Floating Oil Skimmer)

 

KOWS/I series Oil/Water Separators are widely used to separate oils mixed together within in-line circulating oily water and solution. These are frequently applied in situations where (1) an appropriate time is not allowed until mechanically suspended oil droplets freely rise up to water surface or (2) an appropriate space is unavailable for setting larger settling tanks or where (3) rapider oil/water separation of in-line oily water is necessary that has virtually been unavailable by plain gravity separators with no coalescing pack or by ordinary oil skimmers. Integrated Oil/Water Separators are composed of a KOWS Pack-type Oil/Water Separator, oily water supply pump and floating suction unit. Also called floating oil skimmers.

 How it works

Oily water is fed through the floating suction unit and oily water supply pump to the inflow chamber of O/W separator and rapidly separates into three phases (oil, water and solid) when passing through the separation chamber equipped with oil coalescing media packs that provide high surface area for coalescing minute oil droplets as much as possible. Coalescing and growing bigger, oil droplets consequently rise up to above the pack and gravitationally discharge through the rotary pipe skimmer. Treated water (clean) flows outside through the outflow chamber. Most of suspended heavy solid particles settle down first in the inflow chamber, then in the separation chamber do less heavy ones. Solid sludge settled on each chamber bottom should periodically be cleaned up.

 

Features

- KOWSI O/W Separator consists of a stainless steel separating tank, one- or two-staged oil coalescing media pack, and rotary pipe skimmer. As the integrated system additionally includes a oily water supply pump and floating suction unit, KOWSI is readily available for operation once installed at the final location.

- Separation of oil globules down to 20 microns

- Removal of mechanically or temporarily dispersed oils in the turbulent water

- Durable tank made of stainless steel (SS304). Compact design. Least installation space

- Media packs in the separation chamber enhance the function of rapid gravity separation because of their unique vertical matrix of perforated oleophilic tubes in poly or stainless steel, or because of their very high surface compact packs in poly.

 

 

Specifications

Model

KOWSI-0.3

KOWSI-0.6 (formerly Floating Oil Skimmer)

KOWSI-1.2

Flow Rate (Max.)

0.3ton/hr,

5 lpm,

1.32gpm

0.6ton/hr,

10 lpm,

37.85gpm

1.2ton/hr,

20 lpm, 5.3gpm

Flow Rate

(Average)

0.24ton/hr, 4 lpm,

1.05gpm

0.48ton/hr,

8 lpm,

2.10gpm

0.96ton/hr,

16 lpm,

4.24gpm

Oily Water Inlet ∅

25A

25A

50A

Water Outlet ∅

25A

40A

50A

Oil Outlet ∅

25A

32A

50A

Tank Holding Capacity

 

65 liters

(17gal)

120 liters

(32gal)

250 liters

(66gal)

Type of Media

Perf. tube pack+foam pack

indiv. media pack, or Perf. tube pack+foam pack

Perf. tube pack+foam pack, or Hi-surface compact pack

Dimension

(WxHxD in mm/in)

Rectangular boxW400xH500xD550

Cylindrical box∅700xH900

or rectangular box700x760x366/27.5x30x14.4

Rectangular box700x760x725/27.5x30x28.5

Oily Water Supply Pump

Fract motor pump

under 1Hp

1Hp

Floating Suction Unit

KFS-300

KFS-300

KFS-300 or KFS-700

* For more details of the above-shown models and also for complete information on larger models KOWSI-2.4 and KOWSI-4.8 that do not appear, visit 'www.kum-in.co.kr'.

 

* For technical improvement, design and specifications are subject to change without prior notice.

 

- In transferring treated water (clean) high above the outlet level, an auxiliary service tank with a pump should be prepared by customer.

- Pre-installation considerations: oils (not chemically emulsified), hourly peak of oily water, ratio of oil to water, amount of solid in water, tank (aboveground or underground), water pH and temperature, available electric voltage

 

Options

- Stainless steel media tube and frame for hot liquids over 55Deg C

- Corrosion-resistant, chemical-resistant wet parts

- Feed pump and type: ordinary self-prime, vacuum self-prime, air diaphragm (according to the level of the O/W separator and the customer's oily water tank)

- Motor pump electricity: 220V, 380V, 440V, 1Ph, 3Ph, 50Hz, 60Hz. as required by customer

- Electric control box (for additions such as feed pump switch, liquid level switch relay or timer)

- Liquid level switch relay

- Timer

- Mobile cart

 

Applications

In-plant coolant tanks and pits, part washing tanks, pre-paint degreasing tanks, as well as outdoor settling tanks, water reservoirs, basins, ponds, restaurants, cafeteria, motels, hotels, and other public facilities where greases or oils need to be removed.

 

 


Product Image

  • Integrated Oil/Water Separator, Pack-Type (Larger Models) image

Related products from premium suppliers on EC21

Send an Inquiry to this supplier

Send an Inquiry to this supplier
* From
  To ChulBok Kim
Kum-In Corporation
* Buying Product
- Please enter your specific buying item.
e.g. 42 inch LCD TV, leather executive chair
Category : Other General Industrial Equipment
* Message

Use English only Max. 2000 characters. (Min. 20)

Send
EC21.com does not guarantee the validity of product information or the credentials of sellers.