|
|
| |
|
|
|
|
|
|
 Click to enlarge image
|
 Model Number |
KOS-B0512, KOS-B1012, KOS-B1020, KOS-B2020 |
|
|
|
|
KOS-B Oil Skimmers are generally applied to the removal and recovery of floating oils from the surface of water and solution. For best skimming results, oils as well as greases and fats should be immiscible and in a free-flowing state. Meanwhile, the water surface needs to be calm and oil droplets emulsified mechanically in the water require appropriate time to freely rise toward the surface before the water carries them out in the effluent. | |
 How it works |
|
The motor-driven oleophilic belt rotates two pulleys going in and out of the surface oil layer. Oils stick to both sides of the rotating belt and get wiped out as the belt passes between bisymmetric wiping blades. Wiped oils flow down to the oil trough and then to the built-in oil/water separator. Virtually water-free oils and oil-free water discharge through respective outlets of the separator. |
| Features |
|
* Rugged steel construction, simple installation, least
installation space
*Various models: meet different hourly peaks of oil influx
regarded as model selection standard
* Built-in gravity O/W separator: provides additional
separation of even small quantity of water mixed together
with in the oils when skimmed, and is easy to remove
accumulated sludge.
* Adjustable wiper blades: closely contact with both belt
sides
* Uninterrupted skimming function regardless of fluctuating
water level
* Pulley yoke with chains: prevents a tail pulley from
deviating or falling down
* Belt: endlessed and made of chemical resistant poly
material. Heat resistant belts for hot liquids over 60°C are
an option. |
| |
| Specifications |
| MODEL |
KOS-B0512 |
KOS-B1012 |
KOS-B1020 |
KOS-B2020 |
Remarks |
|
Oil Skimming Rate |
23ℓ/hr(6gph) |
45ℓ/hr(12gph) |
75ℓ/hr(20gph) |
150ℓ/hr(40gph) |
motor oil at normal temp. |
| Gearmotor |
40W (1/12Hp)
110/220/380/440V |
60W(1/12Hp)
110/220/380/440V |
90W(1/12Hp)
110/220/380/440V |
90W(1/8Hp)
110/220/380/440V |
1Ph or 3Ph.
50Hz or 60Hz |
| Pulley Diameter |
120㎜(4.72") |
120㎜(4.72") |
200㎜(7.87") |
200㎜(7.87") |
drive pulley & tail pulley |
| Belt Width |
50㎜(2") |
100㎜(4") |
100㎜(4") |
200㎜(8") |
|
| Built-in O/W Separator |
4ℓ(1gal) |
5ℓ(1.25gal) |
8ℓ(1.25gal) |
10ℓ(2.5gal) |
compiementary
gravity separation |
Dimension
W?L?H(㎜/in) |
390x355x440/
15.4x14x17.3 |
390x405x440/
15.4x16x17.3 |
490x455x610/
19.3x18x24 |
490x555x610/
19.3x21.9x24 |
w/o switch box, deduct
90㎜(3.5")from the width | |
|
※Pre-installation considerations: hourly peak of oil influx, oils(floating, free-flowing), tank(aboveground or
underground), height of skimmed oil holding container, lowest water level, water temperature, electric voltage, etc.
※Support stand for installation: ordinarily excluded from the scope of supply, unless otherwise expressed in writing. |
|
|
| Options |
|
* Belt length: min. 300㎜(measured from the skimmer base down to the tail pulley center), increased by 300㎜
up to as required
* Motor electricity: 110V, 220V, 380V, 440V, 50Hz, 60Hz
Other voltages are available.
The 1Ph motor goes with illuminated rocker switch as standard.
The 3Ph motor with lead wire or terminal box as standard.
* Motor: explosion-proof, invertible, pneumatic
* Electric control box(for additions i.e. 3ph motor switch, liquid level switch relay or timer)
* Liquid level switch relay
* Timer
* Oil/water hose
* Support stand for installation
* Stainless steel construction(SS304) |
|
|
| Applications |
|
* Removal and recovery of various kinds of floating(tramp) oils
* Oil/Water separators, wastewater treatment, car washing plant, parking lot
* Heat treatment/quenching
* Automobile/railway maintenance workshop
* Pre-paint and pre-plate degreasing
* Foodstuff and fishery processing plant
* Part washing tank/pit, metal forming coolant tank
* Steel mill, iron mill, oil refinery, chemical plant, oil reservoir
Design and specifications are subject to change without prior notice. |
|
| |
|
|
|
|
| |
|
|
|
Related Keywords:
Bookmark / Share this page